Hardware Specifications and Configurations
|
Item |
Controller |
|
System core logic |
82815EM/ ICH2-M |
|
Super I/O controller |
Kahuna |
|
Audio controller |
ALC200 |
|
Video controller |
Intel Solano2-M |
|
IDE controller |
ICH2- |
|
Keyboard controller |
Kahuna |
|
RTC |
ICH2- |
|
PCMCIA Controller |
OZ711 |
|
Processor | |
|
Item |
Specification |
|
CPU type |
Intel Coppermine 800 MHz ~ 1 GHz processor with 256 Kbytes on-die L2 cache |
|
CPU package |
MBGA package |
|
CPU core voltag |
1.6V/1.35V |
|
CPU I/O voltage |
1.5V |
|
BIOS | |
|
Item |
Specification |
|
BIOS vendor |
PhoenixBIOS |
|
BIOS version |
V1.0 R00-C9 |
|
BIOS ROM type |
LPC Flash ROM |
|
512 KB | |
|
BIOS package |
32-pin TSSOP |
|
Supported protocols |
ACPI 1.0b, HDD Password, Int 13h Extensions, S4BIOS for Win98, PnP BIOS 1.0a, SMBIOS 2.3,Simple Boot Flag 1.0, PCI 2.1 USB specification 1.0., PCI Bus Power Management interface Specification, Boot Block, SMI 1.2, EPP/IEEE 1284, ECP/IEEE 1284 1.7 & 1.9, IrDA, PS/2 keyboard and mouse, VESA VGA BIOS, DDC-2B, CD-ROM bootable |
|
BIOS password control |
Set by switch, see SW2 settings |
|
Second Level Cache | |
|
Item |
Specification |
|
Cache controlle |
Built-in CPU |
|
Cache size |
256 KB |
|
1st level cache control |
Always enabled |
|
2nd level cache control |
Always enabled |
|
Cache scheme control |
Fixed in write-back |
|
Item |
Specification |
|
Memory controlle |
Built-in 82815E |
|
Onboard memory size |
0 MB |
|
DIMM socket numbe |
2 sockets |
|
Supports memory size per socket |
128 MB |
|
Supports maximum memory size |
256MB (128MB x 2) |
|
Supports DIMM type |
SDRAM |
|
Supports DIMM speed |
100 MHz |
|
Supports DIMM voltage |
3.3V |
|
Supports DIMM package |
144 pin so-DIM |
|
Memory module combinations |
You can install memory modules in any combinations as long as they match the above specifications. |
|
Slot 1 |
Slot 2 |
Total Memory |
|
0 MB |
128 MB |
128 MB |
|
128 MB |
0 MB |
128 MB |
|
128 MB |
128 MB |
256 MB |
Above table lists some system memory configurations. You may combine DIMMs with various capacities to form other combinations.
NOTE: The shipping specification for DIMM combination is 64MB in slot 1. LAN Interface
|
Item |
Specification |
|
LAN Interface/Chipset |
Intel ICH2-M integreated LAN controller with 82562ET PHY |
|
Supports LAN protocol |
10/100 Mbps |
|
LAN connector type |
RJ45 |
|
LAN connector location |
Rear side |
|
Item |
Specification |
|
Wireless LAN interface |
Mini PCI interface IEEE 802.11b LAN card |
|
Channel support Default channel support |
Covering the FCC subset of the IEEE802.11b ISM band |
|
Antenna diversity support |
Enabled or Disabled |
|
Enable/disable radio |
Support FAA requirement |
|
Encryption support |
Support both 60(64)-bit Wired Equivalent Privacy (WEP) encryption and 128-bit RC4 encryption |
|
PCI configuration data |
PC98/99 compliant |
NOTE: The IEEE 802.11b MiniPCI card has two RF connectors mounted, identified as Main and Auxiliary connector. Since there is only one card variant in this controlled deployment program, it is chosen that antenna diversity can be obtained by use of an external antenna diversity switch, which is connected to the Main RF connector, and controlled by DC-switching voltage provided through this connector
|
Item |
Specification |
|
Modem Interface/Chipset |
MDC interface/ Built in ICH2-M AC'97 2.1 compliant digital controller interface |
|
Fax modem data baud rate (bps) |
14.4K |
|
Data modem data baud rate (bps) |
56K |
|
Supports modem protocol |
V.90 data modem 56K, V.90 fax modem 14.4K and digital line protection operation |
|
Modem connector type |
RJ11 |
|
Modem connector location |
Rear side |
|
Item |
Specification | |||
|
Vendor & Model Name |
DK23BA-10 |
DK23BA-20 |
IBM DJSA-21 |
IBM DJSA-220 |
|
Capacity (GB) |
10 |
20 |
10 |
20 |
|
Bytes per sector |
512 |
512 |
512 |
512 |
|
Logical heads |
16 |
16 |
16 |
16 |
|
Logical sectors |
63 |
63 |
63 |
63 |
|
Drive Format | ||||
|
Logical cylinders |
16383 |
16383 |
16383 |
16383 |
|
Physical read/write heads |
2 |
4 |
2 |
4 |
|
Disks |
1 |
2 |
1 |
2 |
|
Spindle speed (RPM |
4200 |
4200 |
4200 |
4200 |
|
Performance Specifications | ||||
|
Buffer size (KB) |
512 |
2048 |
512 |
2048 |
|
Interface |
IDE (ATA-5) |
IDE (ATA-5) |
IDE (ATA-5) |
IDE (ATA-5) |
|
Data transfer rate (disk buffer, MB/s) |
14.1-24.8 |
14.1-24.8 |
13.625-25.375 |
13.625-25.375 |
|
Data transfer rate (host buffer, MB/s) |
16.6 (PIO Mode-4) 66.6 (Ultra DMA Mode-4) | |||
|
DC Power Requirements | ||||
|
Voltage tolerance |
5+/-5% |
5+/-5% |
5+/-5% |
5+/-5% |
|
Item |
Specification |
|
Vendor & model name |
KME UJDA330 8X / 4X / 24X |
|
Performance Specification | |
|
Transfer rate (KB/sec) |
CAV Mode: 775~1800 blocks/sec Mode 1: 1550~3600 kBytes/sec Mode 2: 1768~4106kBytes/sec |
|
Access time (typ.) |
Random: 150 ms Full Stroke: 300 ms |
|
Rotation speed |
5000 rp (typ.) |
|
Item |
Specification |
|
Buffer memory |
2 MB |
|
Interface |
ATAPI |
|
Applicable disc format |
CD-DA, CD-ROM (Mode-1, Mode-2), CD-ROM XA MODE-2 (FORM-1, FORM-2), Multi-Session Photo CD, CD-I, Video CD, Enhanced CD & CD PLUS Compatible, CD-R/W |
|
Loading mechanis |
Drawer with soft eject and emergency eject hole |
|
Power Requirement | |
|
Input Voltage |
5 V |
|
Item |
Specification | |
|
Vendor & model name |
Toshiba SD-C2502 | |
|
Performance Specification |
With CD Diskette |
With DVD Diskett |
|
Transfer rate (KB/sec) |
1,500KB/sec ~ 3,600KB/sec. (FULL - CAV) |
4.58MB/sec ~ 11.08MB/sec. (FULL - CAV) |
|
Access time (typ.) |
110 ms |
150 ms |
|
Rotation speed |
4800 rpm (typ.) |
3700 rpm (typ. |
|
Buffer memory |
512 KB |
512 KB |
|
Interface |
ATAPI | |
|
Applicable disc format |
DVD-ROM, DVD-Video, CD-DA, CD-ROM (Mode-1, Mode-2), CD-ROM XA MODE-2 (FORM-1, FORM-2), Multi-Session Photo CD, CD-I, Video CD, Enhanced CD & CD PLUS Compatible, CD-R/W | |
|
Loading mechanis |
Drawer with soft eject and emergency eject hole | |
|
Power Requirement | ||
|
Input Voltage |
5 V | |
|
Item |
Specification |
|
Audio controller |
ALC200 |
|
Audio onboard or optional |
Built-in ICH2-M |
|
Mono or Stereo |
Stereo |
|
Resolution |
16 bit |
|
Compatibility |
Windows Sound System (WSS), Microsoft PC98/PC99 |
|
Mixed sound source |
Voice, Synthesizer, Line-in, Microphone, CD |
|
Voice channel |
6/16-bit, mono/stereo |
|
Sampling rate |
48 KHz |
|
Internal microphone |
Yes |
|
Internal speaker / Quantity |
Yes/ 2 pieces |
|
Supports PnP DMA channel |
DMA channel 0 DMA changel 1 |
|
Supports PnP IRQ |
IRQ3, IRQ7, IRQ10, IRQ11 |
|
Item |
Specification |
|
Vendor & model name |
Intel Solano2-M |
|
Item |
Specification | |
|
Chip voltage |
1.8V | |
|
Supports ZV (Zoomed Video) port |
No | |
|
Graph interface |
DVO I/F | |
|
Maximum resolution (LCD) |
1024x768 (24 bit colors) | |
|
Maximum resolution (CRT) |
1024x768 (24 bit colors) | |
|
Video Memory | ||
|
Item |
Specification | |
|
Fixed or upgradeable |
W986432AH-7 SDRAM-133MHz | |
|
Video memory size |
11MB | |
|
Video Resolutions Mode | ||
|
Resolution |
Refresh Rate | |
|
CRT Only |
LCD/CRT Simultaneous | |
|
640x480x256 |
85 |
60 |
|
640x480x64K |
85 |
60 |
|
640x480x16 |
85 |
60 |
|
800x600x256 |
85 |
60 |
|
800X600X64K |
85 |
60 |
|
1024x768x25 |
60, 75 |
60 |
|
USB Port | ||
|
Item |
Specification | |
|
USB Compliancy Level |
1.0 | |
|
UHCI |
USB 1.0 | |
|
Number of USB port |
2 | |
|
Location |
Rear side | |
|
Serial port function control |
Enable/Disable by BIOS Setup | |
|
IrDA Port | ||
|
Item |
Specification | |
|
IrDA FIR port controller |
Ultra I/O LPC47N252 208P | |
|
Number of IrDA FIR port |
1 | |
|
Location |
Front side | |
|
IrDA FIR port function control |
Enable/disable by BIOS Setup | |
|
Optional IrDA FIR port (in BIOS Setup) |
2F8h, 3F8h, 3E8h, 2E8 | |
|
Optional IrDA FIR port IRQ (in BIOS Setup) |
IRQ3, IRQ4 | |
|
Optional IrDA FIR port DRQ (in BIOS Setup) |
DRQ3, DRQ1, DRQ0 | |
|
Item |
Specification |
|
PCMCIA controller |
O2 Micro OZ711 CardBus controller (Tarzan) |
|
Supports card type |
Type II/I |
|
One for smart card (upper with HDD frame) | |
|
Access location |
Left side |
|
Supports ZV (Zoomed Video) port |
No |
|
Supports 32 bit CardBus |
Yes |
|
Item |
Specification |
|
Power management |
Compliant with ACPI-PCI Bus Power Management interface Specification Rev 1.1 |
|
Hot insertion and removal |
Enabled or Disabled |
|
Memory access |
Support Direct Memory Access for PC/PCI and PCI/Way on PC Card socket |
|
Data transfer |
Support multiple FIFOs for PCI/CardBus data transfer |
|
Programmable interrupt protocol |
PCI, PCI+ISA, PCI/Way, or PC/PCI interrupt signaling modes |
|
Item |
Specification | ||
|
Keyboard controller |
Kahuna controlle | ||
|
Keyboard vendor & model name |
API | ||
|
Total number of keypads |
84/85/88-key | ||
|
Windows 95 keys |
Yes | ||
|
Internal & external keyboard work simultaneously |
Yes | ||
|
Battery | |||
|
Item |
Specification | ||
|
Vendor & model name |
Sanyo 3UF103450P-2 |
SMPLO Main BTP-37D1 |
SMPLO Second SBC-6E1 |
|
Battery Type |
Li-ion |
Li-ion |
Li-ion |
|
Pack capacity |
3300 mAH |
3100 mAH |
3100 mAH |
|
Cell voltage |
3.7V |
3.7V |
3.7V |
|
Number of battery cell |
6 |
6 |
6 |
|
Package configuration |
3S-2P |
3S-2P |
3S-2P |
|
Package voltage |
11V |
11V |
11V |
|
Item |
Specification | |
|
Vendor & model name |
Ambit T62I194.00 |
Sumida IV002 (IV09117/T) |
|
Input voltage (V) |
7.5 ~ 21V |
12V |
|
Input current (mA) |
1000mA max |
400 mA max |
|
Output voltage (Vrms, no load) |
1450Vrm |
1400Vrm |
|
Output voltage frequency (kHz |
45K-80K Hz |
55K-65K Hz |
|
Output Current/Lamp |
6.0 mA max |
6.0 mA max |
NOTE: DC-AC inverter is used to generate very high AC voltage, then support to LCD CCFT backlight user, and is also responsible for the control of LCD brightness. Avoid touching the DC-AC inverter area while the system unit is turned on.
NOTE: There is an EEPROM in the inverter, which stores its supported LCD type and ID code. If you replace a new inverter or replace the LCD with a different brand, use Inverter ID utility to update the ID information.
|
Item |
Specification | |
|
Vendor & model name |
LG LP141X7 |
IBM ITXG77 C |
|
Mechanical Specifications | ||
|
LCD display area (diagonal, inch) |
14.1 |
14.1 |
|
Display technology |
TFT |
TFT |
|
Resolution |
XGA, 1024x768 |
XGA, 1024x76 |
|
Supports colors |
262K |
262K |
|
Optical Specification | ||
|
Brightness control |
keyboard hotkey |
keyboard hotkey |
|
Contrast control |
No |
No |
|
Electrical Specification | ||
|
Supply voltage for LCD display (V) |
3.3 |
3.3 |
|
Supply voltage for LCD backlight (Vrms) |
725 |
650 |
|
Item |
Specification | |
|
Vendor & model name |
Lite-On PA-1600-02 |
Delta ADP-60DB |
|
Input Requirements | ||
|
Maximum input current (A, @90Vac, full load |
1.5 A @ 90Vac 0.9 A @ 180Vac |
1.5 A @ 90Vac 0.9 A @ 180Vac |
|
Nominal frequency (Hz) |
47 - 63 |
47 - 6 |
|
Frequency variation range (Hz) |
47 - 63 |
47 - 6 |
|
Nominal voltages (V) |
90 - 264 |
90 - 264 |
|
Inrush current |
The maximum inrush current will be less than 50A and 100A when the adapter is connected to 115Vac(60Hz) and 230Vac(50Hz) respectively. |
The maximum inrush current will be less than 50A and 100A when th adapter is connected to 115Vac(60Hz) and 230Vac(50Hz) respectively. |
|
Item |
Specification | |
|
Efficiency |
It should provide an efficiency of 83% minimum, when measured at maximum load under 115V(60Hz). |
It should provide an efficiency of 83 minimum, when measured at maximum load under 115V(60Hz). |
|
Output Ratings (CV mode | ||
|
DC output voltage |
19 +1.5/-0 V |
19 +1.5/-0 V |
|
Noise + Ripple |
300m Vp-p max (20MHz bandwidth) |
300m Vp-p max (20MHz bandwidth |
|
Load |
0 A (min.) 3.16 A (max.) |
0 A (min.) 3.16 A (max.) |
|
Output Ratings (CC mode) | ||
|
DC output voltage |
+12V ~ +19V |
+12V ~ +19V |
|
Constant output |
2.75 ± 0.2 A |
2.75 ± 0.2 A |
|
Dynamic Output Characteristics | ||
|
Turn-on delay time |
2 sec. (@115Vac) |
2 sec. (@115Vac) |
|
Hold up time |
4 ms min. (@115 Vac input, full load) |
4 ms min. (@115 Vac input, full load |
|
Over Voltage Protection (OVP) |
24 V |
24 V |
|
Short circuit protection |
Output can be shorted without damage |
Output can be shorted without damage |
|
Electrostatic discharge (ESD) |
15kV (at air discharge 8kV (at contact discharge) |
15kV (at air discharge) 8kV (at contact discharge) |
|
Dielectric Withstand Voltage | ||
|
Primary to secondary |
1500 Vac (or 2121 Vdc), 10 mA for 1 second |
1500 Vac (or 2121 Vdc), 10 mA for 1 second |
|
Leakage current |
0.25 mA max. (@ 254 Vac, 60Hz |
0.25 mA max. (@ 254 Vac, 60Hz) |
|
Regulatory Requirements |
Internal filter meets:
|
Internal filter meets:
|
|
Power Saving Mode |
Phenomenon |
Standby Mode
|
|
Hibernation Mode
|
□ All power shuts off |
|
Display Standby Mode Keyboard, built-in touchpad, and an external PS/2 pointing device are idle for a specified period. |
□ The display shuts off |
|
Hard Disk Standby Mode Hard disk is idle within a specifie period of time. |
□ Hard disk drive is in standby mode. (spindle turned off) |
|
Environmental Requirements | |
|
Item |
Specification |
|
Temperature | |
|
Operating |
+5 ~ +35°C |
|
Non-operating |
-20 ~ +60° |
|
Non-operating |
-20 ~ +60°C (storage package) |
|
Humidity | |
|
Operating |
20% ~ 80% RH, non-condensing |
|
Non-operating |
20% ~ 90% RH, non-condensing |
|
Non-operating |
20% ~ 90% RH, non-condensing (storage package |
|
Vibration | |
|
Operating (unpacked) |
5 ~ 25.6 Hz: 0.38mm (peak to peak) 25.6 ~ 250 Hz: 0.5G |
|
Non-operating (unpacked) |
27.1 Hz ~ 50 Hz: 0.41mm (peak to peak) 50 ~ 500 Hz: 2.0G |
|
Non-operating (packed) |
5 ~ 62.6 Hz: 0.51 mm (peak to peak) 62.6 ~ 500 Hz: 4G |
|
Item |
Specification | |
|
Dimensions |
308(W) x 247(D) x 24.5~29.9(H) mm for 14.1" TFT | |
|
Weight |
5 lbs for 14.1" TFT model | |
|
I/O Ports |
One type II PCMCIA (PC card) slot or one SmartBus slot, two USB ports, one PS/2 keyboard/mouse port, one RJ11 port, one RJ45 port, one VGA port, on line-out jack, one line-in/microphone-in jack, one 100-pin port-replicator connector | |
|
Drive Bays |
Two | |
|
Material |
LCD panel & lower Case: Meg-Alloy Others of housing: Plastic | |
|
Indicators |
Wireless Communication, Power-on LED, Sleep, Media Activity, Battery Status, Caps Lock, Num Lock | |
|
Switch |
Power | |
|
Memory Address Map | ||
|
Memory Addres |
Size |
Function |
|
00000000-0009FFFF |
640 KB |
Base memory |
|
000A0000-000BFFFF |
128 KB |
Video memory |
|
000C0000-000CCFFF |
48 KB |
Video BIOS |
|
000CA000-000CBFFF |
8 KB |
I/O ROM |
|
000E0000-000FFFFF |
128 KB |
System BIOS |
|
00100000-top limited 04301000-04301FFF 04302000-04302FFF 0430000-04300FFFF |
4 KB 4 KB 64 KB |
Extended (DIMM) memory PCMCIA controller (slot 1) PCMCIA controller (slot 2) USB controller |
|
FFFF0000-FFFFFFFF |
64 KB |
System board extension for PnP BIOS |
|
I/O Address Map | ||
|
I/O Address |
Function | |
|
000-00F |
DMA controller-1 | |
|
020-021 |
Interrupt controller-1 | |
|
040-043 |
Timer 1 | |
|
060, 064 |
Keyboard controller 8742 chip select | |
|
062, 066 |
System speaker, ACPI embedded controller | |
|
061 |
System speaker | |
|
070-073 |
System CMOS/real-time clock | |
|
081-08F |
DMA page register | |
|
0A0-0A1 |
Interrupt controller-2 | |
|
0C0-0DF |
DMA controller-2 | |
|
0F0-0FE |
Numeric data processor | |
|
170-177 |
2nd EIDE device (CD-ROM) select | |
|
1F0-1F7 |
1st EIDE device (hard drive) select | |
|
3F8-3FF |
COM1 | |
|
2F8-2FF |
COM1or FIR (optional) | |
|
3E8-3EF |
COM1or FIR (optional) | |
|
2E8-2EF |
COM1or FIR (optional) | |
|
I/O Address Map | |
|
I/O Address |
Function |
|
376, 3F6 |
Intel ICH2-M PCI BusMaster IDE Controller |
|
378, 37F |
Parallel port |
|
278, 27F |
Paraller port 1 (optional) |
|
3BC-3BF |
Paraller port 1 (optional) |
|
3B0-3BB 3C0-3DF |
Video Controller |
|
3F0h-3F7 |
Standard Floppy Disk Controller |
|
4D0-4D1 CF8-CFF |
PCI configuration register |
|
IRQ Assignment Map | |
|
Interrupt Channel |
Function |
|
NMI |
System errors |
|
IRQ0 |
System timer |
|
IRQ1 |
Keyboard controller |
|
IRQ2 |
Cascade |
|
IRQ3 |
FIR |
|
IRQ4 |
Serial port 1 |
|
IRQ5 |
Not used |
|
IRQ6 |
Not used |
|
IRQ7 |
Parallel port |
|
IRQ8 |
Real time clock |
|
IRQ9 |
ACPI |
|
IRQ10 |
USB, SMBus, Wireless LAN |
|
IRQ11 |
CardBus controller, Smart card, Internal LAN, VGA |
|
IRQ12 |
PS2 pointing device |
|
IRQ13 |
Numeric data processor |
|
IRQ14 |
1st EIDE device (hard disk) |
|
IRQ15 |
2nd EIDE device (CD-ROM drive) |
|
DMA Channel Assignment | |
|
DMA Channel |
Function |
|
DRQ0 |
Audio or FIR (optional) |
|
DRQ1 |
ECP or Audio or FIR (optional) |
|
DRQ2 |
Not used |
|
DRQ3 |
ECP or FIR (optional) |
|
DRQ4 |
Not used |
|
DRQ5 |
Not used |
|
DRQ6 |
Not used |
|
DRQ7 |
Not used |
Post a comment