Exit Discarding Changes
This menu allows the user to decide the order of boot devices to load the operating system. Bootable devices includes USB drives, the onboard hard disk drive and the DVD drive in the module bay.
Phoenix SecureCore(tm) Setup Utility
Information Main Security Boot Exit
IDE0 : WDC WD3200BEVT-22ZCT0-(S1)
Boot priority order
IDE0 : WDC WD3200BEVT-22ZCT0-(S1)
- IDE CD : Optiarc DVD RW AD-7580S
- PCI LAN: Atheros Boot Agent
- USB HDD :
- USB CDROM :
- USB FDC :
- USB KEY : 8:
Item Specific Help
Keys used to view or configure devices: Up and Down arrows select a device. <+> and <-> moves the device up or down. <f> and <r> specifies the device fixed or removable.
<x> exclude or include the device to boot. <Shift+1>enables or disables a device. <1 - 4> Loads default boot sequence.
|
1-1-1 | |||
|
ESC |
Help ^Q Select Item Exit |9 Select Menu |
F5 En |
Change Values ^KQ Setup Default Select ► SubMenu BFM Save and Exit |
Exit
The Exit screen allows you to save or discard any changes you made and quit the BIOS Utility.
Phoenix SecureCore(tm) Setup Utility
Information Main
Phoenix SecureCore(tm) Setup Utility
Information Main
Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes
Exit System Setup and save your changes to CMOS.
Exit Discarding Changes Load Setup Defaults Discard Changes Save Changes
Exit System Setup and save your changes to CMOS.
Help Exit
Select Item Select Menu
Change Values Execute Command
Setup Default Save and Exit
F9 F10
|
Parameter |
Description |
|
Exit Saving Changes |
Exit System Setup and save your changes to CMOS. |
|
Exit Discarding Changes |
Exit utility without saving setup data to CMOS. |
|
Load Setup Default |
Load default values for all SETUP item. |
|
Discard Changes |
Load previous values from CMOS for all SETUP items. |
|
Save Changes |
Save Setup Data to CMOS. |
BIOS Flash Utility
The BIOS flash memory update is required for the following conditions:
- New versions of system programs
- New features or options
- Restore a BIOS when it becomes corrupted.
Use the Flash16 utility to update the system BIOS flash ROM.
NOTE: Do not install memory-related drivers (XMS, EMS, DPMI) when you use the Flash16 Utility.
NOTE: Please use the AC adaptor power supply when you run the flashit utility. If the battery pack does not contain enough power to finish the BIOS flash, you may not boot the system because the BIOS is not completely loaded.
Average user rating: 5 stars out of 1 votes
Post a comment