Removing the WLAN Board Modules
- See "Removing the Battery Pack" on page 60.
- See "Removing the SD dummy card" on page 60.
- See "Removing the PC and ExpressCard dummy cards" on page 61.
- See "Removing the Lower Cover" on page 62.
- Remove the tape holding the gray antenna.
6. Disconnect the antenna cables from the WLAN board.
7. Move the antenna away from the WLAN board and remove the two screws (F) on the WLAN board to release the WLAN board.
|
Step |
Size (Quantity) |
Color |
Torque |
|
1~2 |
M2 x L3 (2) |
Silver |
1.6 kgf-cm |
- 8. Detach the WLAN board from the WLAN socket.
NOTE: When attaching the antenna back to the WLAN board, make sure the cable are arranged properly.
Average user rating: 5 stars out of 1 votes
Post a comment