Removing the Thermal Modules and the CPU
- Remove the two screws holding the finger heatsink.
- Detach the finger heatsink from the main board.
- Then take out the CPU heatsink from the main board.
21. Use a flat screwdriver to release the CPU lock (Turn counter clock-wise) then remove the CPU carefully.
- Remove the two screws fastening the MXM heatsink.
- Detach the MXM heatsink from the main board.
- Remove the two screws fastening the MXM card
- Remove the MXM card carefully.
Removing the ODD and Dummy cards
- Remove the screw fastening the optical disk drive module on the bottom.
- Use a tool to push the optical disk drive module outwards and remove the ODD module.
- Then remove the PC dummy card.
- Remove the express dummy card.
Removing the ODD and Dummy cards
- Remove the screw fastening the optical disk drive module on the bottom.
- Use a tool to push the optical disk drive module outwards and remove the ODD module.
- Then remove the PC dummy card.
- Remove the express dummy card.
Average user rating: 5 stars out of 2 votes
Post a comment