Replacing the LCD Module
1. Carefully align the LCD module over the hinge sockets and lower the module into the chassis, taking care not to trap the LCD cables.
2. Replace the four securing screws (two on each side) securing the LCD module.
2. Replace the four securing screws (two on each side) securing the LCD module.
3. Replace the LCD power cable and AC power cable in the cable guides and clips as shown.
NOTE: There are two cable channels. The upper channel holds the AC power cable and the lower channel holds the LCD power cable.
- 4. Reconnect the cables as shown.
- 5. Replace the antenna and backlight cables as shown, taking care to follow the cable guides and clips.
6. Push the antenna cables through the chassis and pull through from the other side.
1. Align and replace the Speaker Module in the lower 2. Reconnect the speaker cable as shown. case.
- Place subwoofer module in to the lower case and replace the five securing screws.
- Place subwoofer module in to the lower case and replace the five securing screws.
Average user rating: 5 stars out of 1 votes
Post a comment