Acer Laptop Repair Guides

Removing the Upper Base

• How To Reset Your Windows Password
• Recover Lost Files And Folders
• Ultimate Laptop Repair Videos Collection In Hd

1. Remove the LCD module. See "Removing the LCD Module" on page 73.
2. Turn the computer over. Remove the ten screws on the bottom panel.

Step	Size	Quantity	Screw Type
Upper Cover (Red call out)	M2.0*3.0-I-NI-NYL0K	2
Upper Cover (Blue call out)	M2.5*6.5-I (BZN(NYLOK-RED)	11

3. Turn the computer over and disconnect the three FFC cables from the mainboard.

Unlock the connector and disconnect C as shown.

Unlock the connector and disconnect C as shown.

4. Remove the ten securing screws on the top panel.

Step	Size	Quantity	Screw Type
Upper Cover	M2.5*6.5-I (BZN(NYLOK-RED)	10

WARNING:Care must be taken when removing the Upper Base from the Lower Base to prevent damage or stress to the surface.

5. Grasp the upper base by the sides and gently lift to remove.

1. Remove the Upper Base. See "Removing the Upper Base" on page 74.
2. Unlock the securing latch and disconnect the Touch Pad FFC.

3. Unlock the securing latch and disconnect the Finger Print Reader FFC.

4. Remove the three securing screws.

Step	Size	Quantity	Screw Type
Finger Print Reader	M2.0*3.0-I-NI-NYLOK	3

5. Using your fingers, gently lift the Finger Print Reader board from the Upper Base.

+1 0

Average user rating: 5 stars out of 1 votes